|
MD-1 MANDREL DRIVER Converts Your Drill Press, Lathe, Horizontal Mill or Vertical Mill Into A Tennessee Honing Machine!
 |
INSTANT SET UP--As quick as 1-2-3 without tools. |
|
PERMANENT TYPE MANDREL FOR EXTRA-LONG LIFE--Only the stones contact materials to be honed. Eliminates mandrel marking for cleaner honed surfaces. |
|
CONCENTRIC MANDREL FOR SMOOTHER HONING ACTION--High-precision work produced with less operator fatigue. No realignment of the mandrel as the abrasive wears. |
|
WIDE MANDREL RANGE--From 3/16" to 3.000". Over 3,000" subject to quote. |
|
WIDE STONE AREA FOR FASTER HONING ACTION--Longer stone life, larger stone area. Efficient problem-free honing of surfaces with keyways, splines or cross bores. Simultaneous, precision honing of small pieces with short holes such as spacers or washers. | |
|
TENNESSEE ABRASIVE HIGH QUALITY FINISH--Tennessee Abrasive honing replaces other stock removal operations. |
|
LOCK-IN FEATURE--Stones are locked in mandrel with a lip mechanism on stone holders over 3/16". |
|
RIGID STONES FOR ACCURACY--There is maximum rigidity of expandable stones because the stone shoe rests directly against the taper of the mandrel and is completely supported along its full length and width. The size control dial adjusts expansion. Out-of-round holes are quickly honed true and tolerances held. There is no tendency to bend, cam, sag or yield. |
|
ENGINEERING CONSULTATION SERVICE--Our skilled engineers are at your service to help you with any honing problem you may have. | |
|
|
MD-1 MANDREL DRIVER
When accurate sizing and precision finishing is a must, the TENNESSEE ABRASIVE MD-1 MANDREL DRIVER is the answer!
Keyways and slots hone faster and hold .001 accuracy, ideal for die work, bushings, dowel pin holes. Converts any drill press to a vertical honing machine in seconds! No tools are necessary..snaps in with a twist of the wrist!
Mandrels sizes .177 to 3.000 Standard in stock. Furnished in No. 2, 3 or 4 Morse Tapers, straight or special shank.
Mandrel sizes .060 to .177 recommended only for Horizontal Honing machines and on "VH" Honing heads.
MD-1 Mandrel Driver snaps in with twist of the wrist! |
|
