Bench Type Honing Machine

Now you can turn your workbench
into a low-cost honing center!

Bench Type Honing Machine

Model TABH-2

 

Features
bullet

Infinitely variable speed spindle control with high torque, energy-efficient motor drive.

bullet

Versatile honing range from .060 to 3.500 ID featuring standard 2-stone system for fast stock removal. Mandrels snap into place by bayonet lock without tools to change mandrels or stones.

bullet

Higher, more consistent accuracy since tooling always runs on center without need of spindle line-up. As fast as 1-2-3!

bullet

Permanent type, lifetime mandrel design assures no metal-to-metal contact, with only the stones bearing on the part.

bullet

Stones are precision-ground to size, with cutting pressure easily adjusted by hand knob control at the front of the machine, which also provides semi-automatic expansion control.

bullet

Self-contained 6-gallon coolant system provides a wet honing combination unequaled. Features individual flow control, "memory set," and flexible hose with adjustable nozzle for precise positioning of coolant direction flow.

bullet

Work support and torque bar. Rigid, strong, and easily adjustable for any job.

bullet

Unique square stroke fixture ensures bore-to-face squareness of con-rods. Standard with TABH2-A and optional equipment with TABH-2 model.

Specifications

bullet Type: Manual Stroke Horizontal Bore: From .060 to 3.500 inch
bullet Spindle speed: Model TABH-2 500/1550 RPM, Model TABH2-A 225/800 RPM
bullet Spindle drive: Model TABH-2 1/2 HP - 1700 RPM, Model TABH2-A 1/2 HP - 1440 RPM
bullet Power requirements: 115 V, 60 Hz single phase, std.
bullet Service light: standard On/off switch and foot pedal stop/start
bullet Square stroke fixture: Model TABH2-A standard, Model TABH-2 optional
bullet Dimensions: 24" wide x 36" deep X 17" high
bullet Shipping weight: 200 lbs.

 

 

 

 

 

 

 

 

 


TAHM-2 Universal Industrial Honing Machine
and
TAHM-2 Automotive Honing Machine

Honing Machine

 

Standard Equipment and
Outstanding Features

bullet Heavy steel fabricated base and tray top.
bullet Sealed ball bearing spindle.
bullet 1 HP DC motor, infinitely variable spindle speed control from 0-1750 RPMs, electronic dial for setting best spindle speed for bore size, material and finish.
bullet Stone pressure control knob on machine face that tunes stone pressure to various requirements of different materials and finishes.
bullet Expansion control, stone-feed systems allowing the stone to feed (expand) automatically to a preset limit.
bullet Performance dial indicator showing the setting and the amount of stock being removed during the honing cycle.
bullet Adjustable work light with on/off switch.
bullet Work support and torque bar that is rigid, strong, and easily adjustable for any job.
bullet Unique square stroke fixture assuring bore-to-face squareness of con-rods, standard on the TAHM2-A model and option on the TAHM2 model.
bullet Coolant line with flow control and memory set. Coolant tank has fifteen-gallon capacity and filter element. Tank and and filter can be easily removed for cleaning and replacement. Antisplash tray and side guards also provided.

Specifications

bullet Type: Manually-stroked horizontal
bullet Bore diameter range: .060 to 3.500 inch
bullet Spindle speed: 0-1750 RPMs
bullet Stone feed positive expansion and adjustment in conjunction with performance dial
bullet Spindle Drive Systems: AC to DC power converter, energy-efficient 1 HP high torque variable speed motor. Spindle and expansion start with foot pedal. Separate on/off switch
bullet Adjustable service light with on/off switch mounted on housing
bullet Power required: 115V AC 60 Hz single phase standard
bullet Dimensions: 36" wide x 39" deep x 49" high
bullet Shipping weight: 600 lbs.

Optional Equipment
bullet

Work tray that adjusts from 10" to 31"

bullet

Square stroke fixture with TAHM2 model

 

 
   1580 Jackson Love Highway, Erwin, Tennessee 37650   |   Phone: 1-800-346-6399 or 423-743-3133   |   Fax: 423-743-8534